Mak-CN Series Battery Chargers

Mak-CN is a two stage charging programmed fully automatic battery charging group.,. Devices in this group can be used for all batteries with the nominal voltage value 12V up to 48 V and designed to be used with small and easy–use batteries in plug and run format.In Mak-CN series microprocessor thyristor is used which enables battery to be charged automatically with automatically adjusted current voltage values without any intervention. Thyristor control prevents the battery from being effected by fluctuations on the network and an extreme regulation would be obtained as well as protection from operator faults.The device has a panel where the operator can follow the entire process.There are LED indicators on the panel showing batter charge level and errors. Charging parameters are per-loaded during production of the device according to the battery type which will be used with and these parameters can not be changed by the operator.
Technical DetailsEasy to use – No need for adjustment.
Thyristor System controlled by microprocessor. LED Battery level and charge indicators Fast-fender Charge Function Works with dry,gel and wet batteries Charge Auto Cut-off |
Usage AreaCleaning Machines
Auto Battery Services Small Watercraft DC UPS Systems Battery Powered Toys |
Input Voltage: 220 V 50-60 Hz single phase. AC, three-phase 3x380 V 50-60 Hz. AC
Rated Battery Voltage: 12/24/36/48 (exclusive design is made for non-standard voltage values)
Rated Charge Current: 15 .. 50A
Battery Capacity: 100 to 500 Ah / 500 design for Ah-top
Charging Method: Two-stage, fast - Buffer Battery
Fast Charge Voltage: 2V - 3 V / cell. Set on production.
Charge Voltage: 2V - 3 V / cell. Set on production.
Fast Charge Current: Set on production
Charge current: free from 0-100%, current limiting
Power Solid: Thyristor System
Cooling: Air Cooled
Protection Features: Battery Reverse, Over Current, Over Temperature Short-circuit, phase protection (3-phase system), Battery Deep Discharge Protection
Cabinet: Seamless, Modular Metal Body, Paint Oven
Protection Class: IP20
Color: Cream, Blue, Gray
Transformer: TSE certified, high efficiency
Control: Mak Plus controller Micro Computer Control (MPC)
Control: Automatic
Operation: Full Automatic
480V AC 60Hz input / 125V DC 50A or 30A chargers from Germany is also possible.
Rated Battery Voltage: 12/24/36/48 (exclusive design is made for non-standard voltage values)
Rated Charge Current: 15 .. 50A
Battery Capacity: 100 to 500 Ah / 500 design for Ah-top
Charging Method: Two-stage, fast - Buffer Battery
Fast Charge Voltage: 2V - 3 V / cell. Set on production.
Charge Voltage: 2V - 3 V / cell. Set on production.
Fast Charge Current: Set on production
Charge current: free from 0-100%, current limiting
Power Solid: Thyristor System
Cooling: Air Cooled
Protection Features: Battery Reverse, Over Current, Over Temperature Short-circuit, phase protection (3-phase system), Battery Deep Discharge Protection
Cabinet: Seamless, Modular Metal Body, Paint Oven
Protection Class: IP20
Color: Cream, Blue, Gray
Transformer: TSE certified, high efficiency
Control: Mak Plus controller Micro Computer Control (MPC)
Control: Automatic
Operation: Full Automatic
480V AC 60Hz input / 125V DC 50A or 30A chargers from Germany is also possible.